Call us:844.683.0077      Customer Login   RedDog Elog



Communication Modes: GPRS/EDGE/HSPA and CDMA 1xRTT packet data, UDP and SMS

Location Technology: 50+ channel GPS (with SBAS)

Messages: 20,000 buffered messages

Geo-Fence: 25 radial and 25 polygonal geo-fences on-board device, user definable

Configuration: Automatic over-the-air firmware and configuration updates via PULS™


Location Technology: GPS

Enhancement Technology: SBAS: WASS, EGNOS, MSAS, GAGAN


Fully certified: Fully certified FCC, CE, IC, PTCRB, Applicable Carriers

Comprehensive I/O

OBD-II Interface: OBD-II interface: J1850 PWM, J1850 VPW, ISO-9141-2, ISO-14230, KWP 2000, ISO-15765 CAN Vehicle interfaces are multiplexed to allow full connectivity to retrieve all codes made available by the firmware stack

Outputs: None

Communications Status LEDs: OBD, Cellular and GPS

Bluetooth: Bluetooth 4.0 Dual Mode (optional fit)


Temperature: -30° to + 75° C (connected to primary power)
-40° to + 85° C (storage)

Humidity: 95% R.H. @ 50° C non-condensing Shock and Vibration
SAE J1455 EMC/EMI CE, GCF, eMark (all pending)
RoHS Compliant


Dimensions: 1.5 x 2.5 x 0.98” (43 x 64 x 25mm)

Weight: 1.83oz / 52g (with battery)

Enclosure: Rugged textured plastic enclosure


Operating Voltage: 9-16 VDC

Vehicle Systems Sleep Mode: 4.9mA @ 13V


Via built-in OBD-II connector


The RDD3030 is an economical, full featured vehicle tracking product designed for easy and reliable installation in automobiles. The RDD3030 is an ideal solution for automotive insurance, driver behavior management, auto rental and automotive applications when access to the vehicle diagnostics interface (ODB-II) is required.

The RDD3050 full featured tracking unit features a small size, superior GPS design, ODB-II interface, and 3-axis accelerometer. These features enable the LMU-3030 to access vehicle diagnostic interface data, track vehicle speed and location, plus detect hard braking, cornering or acceleration. Superior internal antennas for both cellular and GPS eliminate the need for professional installation and make the RDD3030 install quick, easy and inexpensive. Messages are transported across the cellular network using enhanced SMS or UDP messaging providing a reliable communications link between the device and your application servers. The RDD3030 is designed to dramatically reduce cost, power and size while significantly improving field reliability in 12 volt passenger or light-duty vehicles.

Key Features

  • Low power sleep mode <3mA
  • Superior GPS and cellular quality
  • Built-in 3-axis accelerometer for motion, tilt, and impact detection
  • Built-in OBD-II connector to read vehicle bus data
  • Built-in cellular and GPS antenna
  • 25 Built-in geo-fences
  • 20,000 buffered messages
  • Optional OBD-II connector cables
  • Optional splitters and extensions
  • Optional serial cable